One side Manual release and dual direct drive cylinders.
- 4,200Kg (9,259LBS.) lifting capacity.
- 2574mm (101 3/4”) drive-through width suitable for most vehicles.
- One side manual release.
- 500mm (19 11/16”) wide column base plate for enhanced stability.
- Standard with 4 two-stage lifting arms.
- Screw-up rubber pads with min height 95mm (3 3/4”).
- Clear floor design with max height of 3835mm (151”) suitable for high roof vehicles.
- Automatic arms restraints.
- Professional powder coating.
- CE certificated.
TECHNICAL DATA:
| Model | 7214DTX |
| Lifting Capacity | 4,500kgs (10,000LBS) |
| Lifting Height | 1920mm (75 9/16”) |
| Lifting Time | 55S |
| Overall Height | 3835mm (151”) |
| Minimum Height | 95mm (3 3 /4”) |
| Overall Width | 3800mm (149 5/8”) |
| Width inside Columns | 3000mm (112 1/4”) |
| Motor Power | 2.2KW (3HP) |
| Shipping Weight | 716kgs (1,578LBS) |
OVERALL DEMENSION:
Custom Options
- OEM service can be offered
- Lift color can be offered as customer request.
- Optional three-stages lifting arms.
- Optional 70mm(2 3/4”) and 100mm(3 15/16”) extension adapters.
- Width between columns can be done 3000mm.
Features and Benefits
- The adapter is ultra-thin design, the minimum height from the ground is 95mm(3 3/4”), which is more suitable for the maintenance and lifting work of low-chassis vehicles.
- The maximum height is 3835mm(151”), and the effective height is 3700mm(145 11/16”), which is more suitable for the lifting of vehicles with high roof.
- The inner pulley of the column is installed on the side of the oil cylinder. Even if the retaining ring falls off, the oil cylinder is only 10mm(3/8”) from the shaft end, which can effectively prevent the pulley from coming out.
- The main structural parts are welded by robot with good welding consistency, high strength and beautiful welding seam.
- Structural parts are sprayed with imported powder, using imported spraying equipment spraying, high temperature curing, can ensure strong adhesion, bright color and beautiful.
Get Instant Quote in 24 Hours
Whether you need your lifts to be mobile, high-cycle, automated, or particularly sized and configured, Eounice has the most customizable capabilities to craft the right lift for you with best accuracy and performance. Benefit from:
35,000m² Vehicle lift production workshop.
Skillful technical research more than 5 years.
ISO 9001 quality management system certificated and CE approved by European Union.
Over 50 automatic production line equipments.
Professional Vehicle Lift Solutions.
Contact Headquarter
Related Products
